![]() ![]() If you frequently go off-road, there’s a chance it could snag on low brush or another obstacle, particularly if the kickstand bounces about, and it could cause an accident. If you use your mountain bike on the road, no problem. A number of models will do the job, but fitting one may not be a good idea. ![]() The modest increase in weight isn’t such a factor on an electric bike. A lightweight aluminum kickstand may not be suitable, while a steel model offers greater rigidity. As with an ordinary bike kickstand, you’ll need to check where it will fit and what size you need. Can I find a kickstand for my electric bike?Ī. For maximum durability, look for a nickel-plated kickstand. If you need to stop on soft ground, the foot should prevent the kickstand from sinking in.Ī steel kickstand offers great strength, but it will rust eventually. It gives a little extra grip on wet pavement so your bike stays where you put it, and it prevents the kickstand from marking delicate surfaces (wooden walkways or decking, for example). If it’s a problem area, people will usually complain! FootĪ plastic or rubber foot is a nice addition. It’s difficult to tell just by looking whether it’s effective or not, so it’s well worth reading online owner feedback. It’s obviously important that the mechanism keeps the kickstand in the up position when you’re riding along. Most will, but there are always exceptions. If you choose the type of kickstand that clamps to the frame, you’ll also want to make sure the clamp can accommodate the frame diameter. Those that offer tool-free adjustment are handy if you have to park on a slope.Īll of these things need to be checked before you order. Many kickstands are adjustable to compensate for different bike designs. With those that clamp to the frame, there can be some variation in position, so manufacturers often give maximum and minimum heights as well. Some base it on the bicycle’s wheel size, while others base it on the frame size. The size can be confusing because different manufacturers use different methods. Steel definitely requires a coating, which varies from paint on the cheapest kickstands to nickel plating or powder coating on more expensive ones. Steel is cheaper and stronger, but it’s considerably heavier and will rust if the finish is damaged. Aluminum kickstands may be left as bare metal, but they are frequently painted. Materialīike kickstands are made of either aluminum alloy or steel.Īluminum has the benefits of being lightweight and corrosion resistant. It’s possible the kickstand might rub, so you need to make sure you’ll have sufficient clearance. Another challenge can be tire size, particularly on fat tire bikes. An adapter may be provided with the kickstand to fit bikes that don’t have a mount, but it’s very important to check sizes to make sure it will fit your bike. Some bikes have a pre-fitted plate for this, but most don’t. These models need a central mounting position between the two frame rails (known as the chain stay) and just in front of the rear wheel. These kickstands can either be the central mount type like double-legged models or clamped to the chain stay or other frame rails.ĭouble-legged kickstands keep the bike upright, which is also handy when you’re performing general maintenance on the bike. Single-legged kickstands always lean the bike at a slight angle. ![]() There are two styles of bike kickstand: single- and double-legged. Each is relatively minor, but added together they can make a big difference: style and positioning, material and finish, size and adjustability, mechanism, and foot. ConsiderationsĪlthough the idea of a kickstand is straightforward, there are several things to think about. You might be better off with a single-leg kickstand. If yours doesn’t have one, check the size requirements carefully. Some bicycles have a built-in mounting plate for a kickstand, which is great for double-legged models.
0 Comments
Leave a Reply. |